AOA alert down to 20 KTS.

[Dirk]

My freshly repaired D10A beeps the audio alert of the AOA all the time, from touchdown right down to pedestrian speed. It did not behave like that before repair. I set the minimum speed to 40KTS as before, but it beeps all the way down to parking position. I set it to start at top yellow, and it does, but won't stop, newest firmware, any idea?

 

[dynonsupport]

We try to retain settings and calibration during repair, but sometimes this isn't possible, and repairs/recalibrations can affect the AOA calibration, even if we are able to restore the calibration you had prior to repair. I'd start with a fresh AOA calibration to see if that helps.