AoA-pitot probe line ident

R_Redman

New Member
Joined
Mar 30, 2006
Messages
10
OK, I give up.   Where is the document which identifies the two aluminum tubes from the AoA-Pitot probe as AoA and pitot pressure ?   Now don't sound like my wife when she finds my lost spectacles pushed back on my head.

Thanks
Bob Redman
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
There is none, though the pitot should be the front tube, and the AOA the rear (it would be hard for them to be arranged otherwise given the geometry of the pitot).

You can double check this by blowing through each tube.
 
Top