AOA setup

[kritsher]

I have the Skyview system in my RV-12. I recently installed and calibrated the AOA sensor and it works fine, but I hear no audio. I have the relative audio set to 100% and it's set to start beeping at "middle of the yellow" but even in the red I hear nothing.

Other Skyview audio is working fine.

Am I missing something?

 

[Dynon]

Do you have one or two SkyView displays in your aircraft? Also, is there a chance you have the inhibit AOA below XX airspeed setting set higher than the speeds you'd be at when in the mid-yellow and above?