AOA tube routing

[mikehoover]

Any diagrams for routing the AOA tube for the Dynon AOA pitot tube? I am building Vans RV-9A. They have a 5/8" pointed out for pentration into the fuse at the wing root for the pitot tube and wiring. I will need an additional hole for the AOA tube but what is the best route to the panel. I thought of routing it across the floor of the fuse to the other side where another hole exists but don't know if that will effect the AOA and pitot system with the extra length of AOA tube. Any suggestions greatly appreciated.

Thanks!
Mike