Ap wiring

[johnsteichen]

I wired the servo red, black, and yellow wires thru the db connectors rather than splice them.. is there any problem. Doing this ? Will the pins carry the current? it did not make sense to use a disconnect for some of the wires and not others. these wires of course never enter the sv-1000

 

[dynonsupport]

The connectors can handle the current just fine. But, just to be clear, you can not use the power that comes over the SkyView Network cables to power the servos. They can only power the low current devices like the ADAHRS and EMS modules. So you still need to bring ship's power to the power/ground pair.