Auto Pilot test

[AWilson]

I haven't bought my panel yet but am installing the servos. I would like to temporarily wire the servos to test their action with my controls.
Can someone advise how I can temporarily wire them?
Is there any harm in doing this? I won't have the limit stop installed for the test as I don't want to somehow ruin a expensive servo.

 

[MGoodacre]

Install the servo with the limit stop and check your control throws don’t hit the stops. The servo won’t move even when powered up so no chance of any damage. The most important thing is max control throws hitting the stops which they must NOT. No need to temporary wire
Mark

 

[MGoodacre]

These servos aren’t like the model aircraft version (but larger) they have no centre on the servo arm throws !
So until you calibrate them in the set up they will not move.