Autopilot Defaults

[Bonwit]

Having played around with the settings on my SkyView autopilot, I'm wanting to go back to square one. Can someone post the default settings, or point me to where I'd find them? In addition, if any of you RV-6 drivers out there are totally happy with your autopilot's behavior, I'd be interested in seeing your settings as well.

Thanks!

 

[RV8JD]

To reset to defaults, see Page 1-2 and Appendix A (page 8-1) of the document linked below. But note that Dynon has added some settings that are not covered in this document since it has not been updated since 12/2016.

https://dynonavionics.com/includes/guides/SkyView_Autopilot_In-Flight_Tuning_Guide-Rev_C.pdf

Also note that there is an error in the autopilot code in v16.2.4 that yields aggressive roll-in characteristics. It does not affect everyone, apparently. Dynon does have a fix (in v16.4.RC0.9553), but you have to ask for it now if you want it, before they post it for general use.

See posts #75 from Dynon:

Autopilot Rolls Into Turns Like A Fighter Pilot

I have a SV Classic Touch, and it exhibited this behavior.

forum.flydynon.com

And my experience with the fix (v16.4.RC0.9553) in post #78:

Autopilot Rolls Into Turns Like A Fighter Pilot

I have a SV Classic Touch, and it exhibited this behavior.

forum.flydynon.com

 

[Bonwit]

This is just what I was looking for . Thank you, and thanks for the links.