Create an Audio Caution for a Contact

[JohnAJohnson]

I am monitoring my Landing Gear Pump motor with EMS37-P11, and when the pump runs, it turns the widget BLUE on the HDX. Works fine. I'd like to also get an audio tone, chime, or other headset message when the pump is running. Is this possible?

c37_p11={
valid=1
name=GRPUMP
id=CONTACT
alarm_type=SELF-CLEAR
range={
max_display=5
min_display=0
range1_valid=1
range1_top=5
range1_bot=0.7
range1_name=
range1_color=BLUE
range2_valid=1
range2_top=0.5
range2_bot=0
range2_name=
range2_color=BLACK
range3_valid=0
range3_top=20
range3_bot=10
range3_name=R3
range3_color=GREEN
range4_valid=0
range4_top=10
range4_bot=5
range4_name=R4
range4_color=YELLOW
range5_valid=0
range5_top=5
range5_bot=0
range5_name=R5
range5_color=RED
}
show_units=1
}

 

[djones]

Change the color to RED on the range you wish to have the audio message and you will get the generic "Engine Monitor" message.

 

[JohnAJohnson]

Change the color to RED on the range you wish to have the audio message and you will get the generic "Engine Monitor" message.

Thanks Don. I kinda thought I'd have to do that but wanted to keep it as a non caution/warning color.