D 10 A start up question

[resojames]

I have rewired my airplane from  having one avionics switch to having a switch for each device including one switch devoted to the D-10.  When I turn it on, it takes from 8 to 10 seconds to light up.  I don't remember it doing this before, although it may have been doing it all along,  Is this normal?

Thanks

 

[dynonsupport]

Definitely not normal. It should light up almost immediately. Look at the clock or any timer that counts up/down. Is it moving slower than real time? In any case, if the unit is getting 10-30V as soon as the switch is thrown (confirm this), this sounds like a hardware problem that you'd need to work with our tech support on to get fixed.