bmarvel
Member
My D-100 has developed a problem it never had before -- maybe after the latest software update but I am not sure of that.
Sometimes when I turn on the master switch, the compass rose appears but vibrates back and forth very rapidly so as to blur all of the numbers. When this happens, I just recycle the circuit breaker or the master switch and it comes back normally. I have not left it in the vibrating state to see if it will recover on its own. Also, it has never done this in flight; it only does so on initial startup and then not every time.
Bill Marvel
Sometimes when I turn on the master switch, the compass rose appears but vibrates back and forth very rapidly so as to blur all of the numbers. When this happens, I just recycle the circuit breaker or the master switch and it comes back normally. I have not left it in the vibrating state to see if it will recover on its own. Also, it has never done this in flight; it only does so on initial startup and then not every time.
Bill Marvel