stefanmatthaei
I love flying!
- Joined
- Jun 7, 2015
- Messages
- 1
Hello
I have a Dynon D1 S/N 220707, recently upgraded to Software Version 1.0.1296 and use it as a backup for IFR. It is connected to the airplane 12V via the original Dynon Power adaptor and set to power-up and power-down with the aircraft power. Since the Dynon power adaptor is plugged into cigarette lighter it works according to the master switch. This has worked nicely so far, in fact I am quite happy with the performance, it mirrors my other instruments perfectly.
However, since my trip to Italy last weekend it won't start anymore. Even after resetting it only shows the blue screen with Dynon logo for about 8 sec, then turns black for 2 sec, quickly flashes white for the fraction of a second and remains black thereafter. No reaction on the on/off button. And no, my wife and I drank the red-wine all by ourselves and did not spill any over the D1
Any advice would be greatly appreciated, many thanks.
Stefan
I have a Dynon D1 S/N 220707, recently upgraded to Software Version 1.0.1296 and use it as a backup for IFR. It is connected to the airplane 12V via the original Dynon Power adaptor and set to power-up and power-down with the aircraft power. Since the Dynon power adaptor is plugged into cigarette lighter it works according to the master switch. This has worked nicely so far, in fact I am quite happy with the performance, it mirrors my other instruments perfectly.
However, since my trip to Italy last weekend it won't start anymore. Even after resetting it only shows the blue screen with Dynon logo for about 8 sec, then turns black for 2 sec, quickly flashes white for the fraction of a second and remains black thereafter. No reaction on the on/off button. And no, my wife and I drank the red-wine all by ourselves and did not spill any over the D1
Any advice would be greatly appreciated, many thanks.
Stefan
