D100 Status showing Standalone

[Allegro]

I just reinstalled a factory-repaired D100. (Aircraft has compass, OAT and AP.) On the first boot, it showed all devices with asterisk and active- except the OAT had no asterisk. I reconfigured the network.
Now on status, it shows 1 Network device EFIS-D100, can provide BM, EFIS, compass, OAT, AP. All show an asterisk but Standalone. The AP setting shows " Menu disabled because EFIS is not Busmaster." The config shows 1 device found. Software is 5.6.1. Can anyone help?

 

[DBRV10]

Are all the other connected devices powered up when you do the network discovery?

 

[Dynon]

That's weird. Do you have another device in the airplane? If so (say, a D180), that would nominally be the busmaster.

 

[Allegro]

That's weird. Do you have another device in the airplane? If so (say, a D180), that would nominally be the busmaster.

Thanks for the replies. All devices are powered up. No D180. Only devices are those already listed. Nothing has changed since the unit was repaired.

 

[DBRV10]

Different software level?

 

[Allegro]

It's working normally now. I guess something wasn't connecting properly.