High_Flyer
I love flying!
Hi,
I just received a D1000-T back from Dynon following repairs.
The failure was a "boot error-contact Dynon if error presists", followed by auto-reboot about once every 5-6 power-ups, that had Dynon issue a RMA for the return of the screen to the USA (I'm in France).
Yesterday I re-installed the screen in my RV-7 and the touch function of the screen doens't work. It was fine before.
There is a caution message "Touch Panel Fault"
in the setup, under Loacl Display Setup-Touch Setup it says "Hardware Status -Offline"...
Everything else works fine...
Is there an easy way to fix this without sending the screen back to the USA?
Thank you.
Alain/RV-7/France
I just received a D1000-T back from Dynon following repairs.
The failure was a "boot error-contact Dynon if error presists", followed by auto-reboot about once every 5-6 power-ups, that had Dynon issue a RMA for the return of the screen to the USA (I'm in France).
Yesterday I re-installed the screen in my RV-7 and the touch function of the screen doens't work. It was fine before.
There is a caution message "Touch Panel Fault"
in the setup, under Loacl Display Setup-Touch Setup it says "Hardware Status -Offline"...
Everything else works fine...
Is there an easy way to fix this without sending the screen back to the USA?
Thank you.
Alain/RV-7/France
