Peter_Gray
New Member
- Joined
- Mar 3, 2008
- Messages
- 7
I have a stand alone D10A, in a glider based in the UK, that quit in mid-flight and thereafter only flashes the blue logo screen at approx 2-3 second intervals. When last working the external and internal batteries showed healthy voltages.
It lives in an under ventilated instrument binnacle and does get hot. I have once last summer had a too hot warning but not since. Venting the binnacle is the current project.
The firmware is still v4.00 installed in April 2008.
Is there anything I can try before you tell me to send it to you?
Pete Gray
It lives in an under ventilated instrument binnacle and does get hot. I have once last summer had a too hot warning but not since. Venting the binnacle is the current project.
The firmware is still v4.00 installed in April 2008.
Is there anything I can try before you tell me to send it to you?
Pete Gray