D10A shows no pitch or yaw information

[blueflyer]

I just installed a D10A and EDC-10A. when I powered up the unit, i gently tilted the EDC10A to simulate pitch and yaw. I got no pitch or yaw information displayed on the D10A, but the headings did change on the D10A when i moved the EDC10A. what could be wrong?

 

[rvator51]

You have to tilt the D10a to get your pitch and yaw changes. the EDC10a does heading changes.  The AHRS is built into the D10a.

 

[blueflyer]

I am so glad when it is determined that "I" am the error and not the hardware. It is much cheaper this way. Thank you for educating me.