D120 EGT sensor

[Robin]

Rotax 912 engine with only one EGT sensor. EFIS dispklay shows false eadings for second sensor which is not there.. Global set up for EGT sensors shows only 2,4 or 6 sensors and no selection for one sensor. Everything else working well.
Any ideas?

 

[Dynon]

Although the software doesn't allow only one EGT, you can physically split the outputs of your single EGT and send it to the inputs to both EGT1 and EGT2. You'll see two EGTs on the display but they'll move together as one.

 

[Robin]

Although the software doesn't allow only one EGT, you can physically split the outputs of your single EGT and send it to the inputs to both EGT1 and EGT2. You'll see two EGTs on the display but they'll move together as one.

Thank you. I will do that.