davejohnson
New Member
- Joined
- Apr 2, 2010
- Messages
- 10
I have a D100 and D120, both have been working fine for 2 years. I recently did a ground run at full power and then tried to download the D120 log, as I have often done. The screen went yellow, no text appeared. Powered off and on again - same thing.
I have removed the D120 (D100 still O.K.) ant powered it up on the bench, it works fine,and I can download logs etc.
I assume a wiring problem, but what could cause this to happen?
Any advice appreciated!
I have removed the D120 (D100 still O.K.) ant powered it up on the bench, it works fine,and I can download logs etc.
I assume a wiring problem, but what could cause this to happen?
Any advice appreciated!