Don't find RPM and Oil Temperature in Sensor Setup

Tuiliere

flying a RV7 in France.
Joined
Mar 13, 2013
Messages
138
Location
FRANCE
Hello Dynon,

I have a Rotax 912 iS with an EMS221 and I would like to change the colors of my engine setting with your new colors, but I don't find The RPM and the Oil Temperature in the Sensor Setup Menu. Can you Help Me ?
Sylvain
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Hi Sylvain,

The color ranges for RPM and Oil Temperature are set according to Rotax's requirements. Please reference page 7-58 of the installation guide:
http://www.dynonavionics.com/downloads/Install_Guides/SkyView_System_Installation_Guide-Rev_Q_v10.0.pdf

Excerpt:

Setting ENGINE TYPE to ROTAX 912 pre-configures some engine settings for a Rotax 912 engine.
SkyView will automatically configure and dynamically change the oil temperature and
tachometer scales and alert thresholds in accordance with Rotax’s recommended ranges,
described in detail below. When this mode is selected, EMS SETUP > SENSOR SETUP > OIL
TEMPERATURE AND TACHOMETER settings are unavailable.
 
Top