Dual Screen ops in RV12

[Exbonanzabucko]

I think I'm gonna do this but I have a couple of questions:
1.)How does the "swap" command work and where is the button for that?
2.)How visible is the starboard side screen from the pilot's seat; does that screen need to be canted to the left for good visibility of a moving map?
3.)Where can I find visual descriptions of moving that lousy Ducati Voltage Regulator in the RV12 from the engine bay to the avionics bay?

Thanks,EBB

 

[dynonsupport]

EBB,
1) The swap command is on the "SCREEN" menu, where you currently turn on/off the PFD, EMS, and MAP. SWAP with switch what is on the left and right screen with a single press instead of making you manually re-configure each screen. The button only appears when two SkyViews are present and configured to allow swap.

2) Lots of our customers have screens over on the co-pilot side and generally there's no angle on those screens. It's far from required, but I'll let our customers answer that more. In my side-by-side plane, the right screen is perfectly visible and usable.

3) You need to ask Van's for the regulator re-location instructions. Dynon had nothing to do with that engineering and we're not specialists at the RV-12. Sorry.

 

[Exbonanzabucko]

Thanks!
EBB