EFIS D10A and Lowrance Airmap 2000c

John_M

New Member
Joined
Jan 3, 2007
Messages
3
Has anybody interfaced the Airmap 2000c to the D10A? If so could you let me know what wiring is required to allow use of the new HSI on the D10A.
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
We currently don't fully support the Lowrance products due to the way they output data. We expect to fix this in the next firmware update.

If you do hook it up today you'll get some of the data, but not the course line.
 

ljreynolds

New Member
Joined
Feb 2, 2007
Messages
1
Is there any specific wiring diagrams available for the Lowrance 2000C and the D180? I am currently building the panel and would like to go ahead and wire the 2000C to the D180 and then update when the firmware is available.
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
The FlightDEK-D180 side of things can be found in our latest installation guide available here. As for the Lowrance side - you'll need the serial data cable from Lowrance.
 
Top