EFIS D6: Airspeed Failover - GPS Connect settings?

[hplevyak]

Folks,
I'd like to wire one of the RS-232 OUT ports from my Garmin GTN650 to the D6, Pin 22 (Yellow/Green) wire for airspeed failover.

Can someone confirm the settings I should use in my GTN650 for this serial port? Like....

1. AVIATION FORMAT / AVIATION OUTPUT 1
2. Baud Rate = 9600
3. Any other settings?

Thank-you,
Howard

 

[jakej]

Howard

1. Is correct, the baud rate is set up by that format.

Nothing else needed for settings.

Cheers,

Jake J