EFIS min and max ?

[gpw678]

Hi all,

Can someone please point me to the min and max speeds, alts and roll rates on the skyview.

We are looking to put a system in our team Hawker Hunters.
We would require, or as close to

600knots
FL450
360 degree+ roll rate.

Anyone interested, our site is

www.teamviperdisplay.com

thanks

GPW

 

[dynonsupport]

15 knots min, Max calibrated is 300 knots IAS. Customers report good performance above 300 knots, but we can't guarantee that.

Max altitude we calibrate to is 30,000 ft.

We have a 150 degree/sec roll rate limit.

Nothing will be damaged by exceeding any of these limits, accuracy is just reduced.

 

[gpw678]

Thank you for the super quick reply.

Is there an option to "tweak" the ASI to read higher?

That would be my main concern. The rest I feel we could live with.

 

[dynonsupport]

The ASI will read higher than 300, and it should be pretty accurate, but we can't promise anything. Luckily higher airspeeds are easier than lower ones since each knot is more pressure increase the faster you go. We have people with L39's that say they are pretty good up to the max speed of those jets.

We can't do any custom work on sensors or calibrations unless you are purchasing serious volumes, and there are no user calibrations to be done.

Alternately, if you want some custom work done, you can give me a ride