EFIS problem

[paparomeo]

Hi all

What do you think about this ?

http://www.dailymotion.com/user/Foxpapa26/video/xansfq_efis_tech

http://www.dailymotion.com/user/Foxpapa26/video/xansn8_efis-2_tech


It seems to be as like problem describe in the post "Compass shimmy" but my T&B and altimeter are also jig.

My version is 5.1 but the problem appear only few weeks after the update.

Thanks.

Patrick

 

[dynonsupport]

That looks like an issue with the unit hardware, not the compass jitter. The giveaway, by the way, is that the ball is jumping. That's affected directly by the inertial sensors. Call us at 425-402-0433 or support at dynonavionics dot com.

 

[bmarvel]

I still get this problem now and then on my D100 but it only occurs on startup. If it happens I just shut the EFIS down and restart it and the problem goes away. I think this first occurred with the 5.1.1 software but am not positive. I know I flew a long time with older software and never had the problem. I was one of the first, if not the first, to mention this to Dynon.

Bill Marvel

 

[paparomeo]

Bill, if I shut my EFIS down I have the same problem when I restart it.
I also try to downgrade my software and can't see any change.

So my EFIS will be return to Dynon to be fixed.

I will let you know the result after.

Patrick