EMS-10 Yellow Screen

[glennrv8]

I have an RV-8 that is just about ready to fly with an EMS-10. I have been running the engine numerous times during taxi testing and the EMS has worked fine. Today I turned the Master Switch on, turned the Avionics Master on, and the unit came up as normal. I started the engine and about 2 seconds later the screen turned yellow with the Dynon logo on it.

I shut everything down then tried again, but the screen came up yellow without the logo right from the start.

I have the 4.0 software downloaded. Any ideas?

 

[dynonsupport]

Pull the 37 pin connector, reconnect it, turn power on, and see if it comes back to life. If not, we'll probably need to take a look at it here. 425-402-0433, then ask for tech support, if that doesn't fix it.