EMS Fuel Flow Representation Issue (Rotax 912iS)

[russp]

Bit of an odd one - on my ribbon at the bottom of the screen I have fuel flow but the red and yellow ranges make no sense .. ok I thought I'll go in and change them - turns out there's also a main flow guage I can show .. I can set ranges for the main flow but not the fuel flow (seems fuel flow is provided by the Rotax EMS connection (CAN) and the main flow comes from somewhere else as it's listed in the sensor list. However the really odd thing is that on the 50% page (and also the 100% page) there is no option to display the fuel flow at all only the main flow. It'd be nice to be able to display the fuel flow on the 50% and 100% pages and I dont understand why I can't - it'd also be nice to be able to set the color ranges for this guage.

Videos showing the issue more clearly are here

Any Ideas?

 

[sunfish]

You should be able to find a sensor called “fuel flow (CAN) on your list. That is what I think you are looking for..

 

[russp]

You should be able to find a sensor called “fuel flow (CAN) on your list. That is what I think you are looking for..

That’s the issue it’s available for the ribbon setup but not for the 50% or 100% pages!