EMS voltage reading

[Owl-Eagle]

Hi all,

When I read 12.2 volts on the D100, I only read 11.4 volts on the D120.
Condition: This is the first time electrical power is applied to the plane.
Voltage at the Bat was 12.2 volt.

Grounding is good and checked and Xchecked.

Luckily everything works fine and no glitches found up to now, except for the voltage on the D120.

Any idea ??? :-/

Francis.

 

[dynonsupport]

Do you have a diode in-line for an emergency buss or anything? How long are your ground and power wires coming from the EMS to the power buss?

 

[Owl-Eagle]

Hi Dynon,

Problem is solved after having solved the Alarm problem mentionned in an other post. Very strange. :-/

Francis.