EMS120 EGT Hassles

[putco]

Hello All

I have an EGT readout on #1 as "N/A" There is no number readout at all, the other three cylinders are fine. When l remove the loom and plug into my D180, the readings are all working.

I have checked all the wiring and crimping and pins - no joy.

Please help...

Thanks

 

[dynonsupport]

Apologies, but is the #1 cylinder working, or not? You said "the readings are all working".

Hello All

I have an EGT readout on #1 as "N/A" There is no number readout at all, the other three cylinders are fine. When l remove the loom and plug into my D180, the readings are all working.

I have checked all the wiring and crimping and pins - no joy.

Please help...

Thanks

 

[putco]

Hi there

Yes it is, new Superior engine. All the others show ambient temp and on startup they rise accordingly. It's just on the #1 that the reading remains "N/A"

 

[dynonsupport]

Apologies, but given the confusion in this exchange, perhaps this would be better to correspond directly with out Tech Support group to sort this out. Please email them at support at dynonavionics dot com, or call 425-402-0433.

Hi there

Yes it is, new Superior engine. All the others show ambient temp and on startup they rise accordingly. It's just on the #1 that the reading remains "N/A"