Engine and PFD indications are dark on Home Screen

[WenEng]

Updated Aviation info to latest (actually not effective yet until 8/18 and today is 8/15). However on one Skyview 10 Touch the main screen indicators for PFD (button 1) and Engine (button 2) are dark and inoperative. The other skyview 10 Touch is perfect. Both had previous updates on software. I tried reloading previous software. No joy. Tried reloading Avdata. No joy. Whats wrong?

 

[rvator51]

Did you try turning the units off and then restarting?

 

[WenEng]

Did you try turning the units off and then restarting?

Yes. I did both a 1,2,5 button reboot, and a 1 button power down and a master switch off and master switch back on. No joy. I'm wondering if it is a Skyview unit problem. The 2nd Skyview did not show this problem. It works fine. Its like button 1 and 2 are inoperative and no PFD or Engine indication is displayed above those two buttons.

 

[Dynon]

If you're seeing a full screen map on that display, just press SCREEN and then turn on the PFD and/or EMS pages by pressing PDF PG and EMS PG to toggle those page displays on and off.

 

[WenEng]

If you're seeing a full screen map on that display, just press SCREEN and then turn on the PFD and/or EMS pages by pressing PDF PG and EMS PG to toggle those page displays on and off.

Well, I feel so dumb. That solved it, but I don't know why they were deselected in the first place. No matter, it was operator error to be sure. Thank you Dynon....