External Compass Calibration Problems

Tony_ONeil

New Member
Joined
Jun 30, 2005
Messages
1
I taxied around all morning trying to get the Magnetic Compass calibration Procedure to work.
I never found a screen that asked me to imput the dip figure.
When I got to the point where I pointed the airplane North and pushed the North button, no 15 second count down window popped up.

I must be doing something wrong.

Got any clues, I followed the installation procedure.

Thanks

Tony
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Hi Tony,

It sounds like you have not yet upgraded your EFIS-D10A software to the version that supports magnetic calibration without a laptop. Version 2.9.0 or greater is required. Please visit our downloads page to get the latest EFIS-D10A software:

http://www.dynonavionics.com/docs/EFIS_D10A_downloads.html

Also, make sure you have the latest installation guide, which describes the calibration procedure in detail. You can find that here:

http://www.dynonavionics.com/docs/EFISD10A_Documentation.html
 
Top