FD180 and D-10A Cannot Display EMS data on D-10A

rockyjs

Member
Joined
Jan 28, 2007
Messages
39
Location
Navarre, FL (AL55)
I searched the manuals and read many posts, but can't find my problem. I just added a D-10A to my existing FD 180. I updated both units to version 5.4 and ran the DSAB configuration. The units are recognized and setting the baro on either crosses to the other unit as well as displaying OAT, Density Altitude etc. I cannot get EMS Data to display on the D10A. The only pages I get switch between EFIS and HSI on the D10A. What am I missing?

Thanks
 

rockyjs

Member
Joined
Jan 28, 2007
Messages
39
Location
Navarre, FL (AL55)
Re: FD180 and D-10A Cannot Display EMS data on D-1

Whoops! I think I figured it out. I need to enable the EMS screen on the rotation list as it is certainly not in the screen rotation now. I'm on my way to the hangar.
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Re: FD180 and D-10A Cannot Display EMS data on D-1

Yep - you just need to add the EMS screen(s) to the rotations.
 

rockyjs

Member
Joined
Jan 28, 2007
Messages
39
Location
Navarre, FL (AL55)
Re: FD180 and D-10A Cannot Display EMS data on D-1

Thanks that worked, however I have two voltmeters and two ammeters displayed. Do I need to look into the configuration of the FD-180. I would like to get the fuel pressure displayed and something else.
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Re: FD180 and D-10A Cannot Display EMS data on D-1

Yep, you just need to configure your info items. It's under EMS SETUP > GLOBAL.
 
Top