Flight Data System's FC-10 Fuel Computer

[Fly4fude]

Hello,

I'm in the process of the final wiring of my Dynon Skyview.  I have a FC-10 fuel computer that has a host of functions.  The directions state the following:

"(Data Transmit to GPS) Connect this wire to your Panel Mount GPS. Handheld GPS do not connect this wire.
The associated GPS connection will be labeled Data in, RS-232 RX, Serial Receive (Consult your GPS Manual)".

I DO NOT have an EMS module.  Will any open serial port provide the 232 RX data this system needs to utilize its full GPS flight planning capabilities?

Thanks for your help!

 

[dynonsupport]

The FC-10 supports NMEA data in, which we can output and send GPS data TO the FC-10.

The FC-10 also sends out data to a GPS. We have no support for data from an external fuel flow device. No connection on the white wire should be made to SkyView.