Fuel calibrations EMS120

[Rob]

I have done the calibration on my RV/7 using liters when the calibration was done it put up a list of numbers that corresponded to each 10 liter pour, the numbers that correspond to these seem to be in US, gallons is this right or have I done something wrong (Australia)
Regards Rob Bellert

 

[dynonsupport]

The numbers on the left are a read out of the different voltages sensed at each point you tested. The numbers on the right are quantity. They may be depicted in gallons there, but the actual readings will obey the units that you have set up.