I have an EMS 120 on my TECNAM SIERRA P2002-RG. Sometimes the fuel pressure changes from 0.25 bar to 0.15 bar; I think my fuel sensor for Rotax (Dynon part # 100411-000) is not working perfectly.
Without the 2 wires connected, the value of resistance between the two leads on the sensor is:
19 ohms at 0 bar (electric fuel pump OFF and engine OFF)
34 ohms at 0,25 bar (electric fuel pump ON and engine OFF)
Are these values of resistance corrected?
Regards
Without the 2 wires connected, the value of resistance between the two leads on the sensor is:
19 ohms at 0 bar (electric fuel pump OFF and engine OFF)
34 ohms at 0,25 bar (electric fuel pump ON and engine OFF)
Are these values of resistance corrected?
Regards