Fuel Pressure

[dft46]

The Fuel Pressure on my D120 in my Sportcruiser has always been low - around 2.2 to 2.5 psi. Can you tell me the resistance values for typical pressures up to say 5psi that I should be getting from the sender unit please? I can then test it to decide whether it needs replacing.
Thanks
DFT46

 

[Roger_Lee]

The fuel pressure sender is famous for going out and the low reading is a typical indicator. It may be in your future to replace the sender.

 

[dynonsupport]

Assuming it's the 0-30psi sensor (marked 0-2 bar on the actual sensor), 0 psi is 11ish oms, 5 psi is 42 ohms.