Garmin 396

[Whocares]

The blue 'data out' wire from my -396 is feeding NMEA-0183 to my autopilot. Can I just splice into that line for the feed to a D10A?
Does anyone have the same setup?
Thanks!

 

[mmarien]

Yes. Data out (TX) can feed any number of devices but a device can only receive (RX) from one source.

My ZAON (TX) feeds both my GPS495 (RX) and Skyview (RX) so there is traffic on both.

My GPS495 (TX) feeds both Skyview (RX) and iCOM A210 (RX) so I get GSP NMEA on Skyview and VHF frequencies on my radio.

 

[Whocares]

Yes. Data out (TX) can feed any number of devices but a device can only receive (RX) from one source.

My ZAON (TX) feeds both my GPS495 (RX) and Skyview (RX) so there is traffic on both.

My GPS495 (TX) feeds both Skyview (RX) and iCOM A210 (RX) so I get GSP NMEA on Skyview and VHF frequencies on my radio.

Thank you!