Garmin 695 Compatibility?

[m.carani]

I can't use the Garmin 695 in combination with my sistem.
Have D 100, D180, AP 74 and Dynon servos.
The software release is 5.1.1.
NMEA exit from Garmin 695 to pin 19 on DB 37 connector in D 180.
Tried many settings on Dynon (Hsi section?) and GPS interface settings.
Which are the correct ones?
Help me, please!
Thanks  

 

[jakej]

But did you configure the output of the 695 ?

 

[dynonsupport]

That is the correct pin on the D180.

Is your 695 running on batteries? If so, you need to make sure it has a good ground to the airplane.

As Jake mentioned, you need to make sure the 695 is outputting data as well. We need a NMEA output string.

Also make sure your input on the D180 is set to AUTO under the HSI menu. You need both format and baud rate set to AUTO under the local serial port / EMS port.

 

[MauiLvrs]

To get our to work, had to set the D-100 to 4800 baud in the HSI 34 settings.