Garmin GAP-26-20 with Skyview

[ackselle]

I have a Garmin GAP-26 (heated and regulated pitot tube, and a Dynon Skyview VFR Advanced Quick Panel. How should I configure the sensor mapping for the pitot tube contact ranges? Is it configured the same as a Dynon Heated AOA/Pitot tube as per the installation manual(pages 15-1 and 15-2)

Thank for you help!
Ackselle

 

[Dynon]

It looks likes its grounded / open states are the opposites of the Dynon pitot, so you'll need to account for that when setting up the contact. But otherwise, the same (but again, opposite)