Hi all;
I understand that if you connect a GNC255 via RS232 to a Skyview, you can then set Nav and Com frequencies, set OBS and display VOR/LOC/GS on the Skyview HSI.
What you cannot simultaneously do is send GPS data to the GNC255 to enable distance/speed/time (pseudo DME) to be displayed on the Garmin, unless you add an ARINC429 also.
May I confirm that my understanding is correct on this?
Thank you
I understand that if you connect a GNC255 via RS232 to a Skyview, you can then set Nav and Com frequencies, set OBS and display VOR/LOC/GS on the Skyview HSI.
What you cannot simultaneously do is send GPS data to the GNC255 to enable distance/speed/time (pseudo DME) to be displayed on the Garmin, unless you add an ARINC429 also.
May I confirm that my understanding is correct on this?
Thank you