GNS-430 Setup(s)

[timfwalsh01]

I searched through the archives for GNS-430 setup.  I realize that there are several threads, but I need to ask a very fundamental question.

Will the GNS-430 automatically put out the correct data for the Dynons to process?

I currently have the EFIS D10, EMS D10A and the HS34.  I am assuming the wiring from the GNS-430 is wired to the HS34 correctly (I hired a smart person to do it for me

Your assistance is greatly appreciated.  Really looking fwd to the autopilot!! Tim

 

[dynonsupport]

No, you need to make sure the 430 is set up correctly as well. The settings are covered in the install manual.

 

[timfwalsh01]

From another vender I found out some very helpful information not covered in the Garmin manuals, nor the Dynon documentation.

In order to get access to the appropriate GNS-430 menu(s) to configure the data out, "hold down the enter key, while turning the power on."  

This may prove useful to other Dynon users.  Tim

 

[timfwalsh01]

Another Dynon user was kind enough to assist me in my search.  He sent this to me from the Dynon wiki:


http://wiki.dynonavionics.com/Garmin_430/530_Wiring

This is most helpful.  Back to flying.

New info - Not inlucded in the wiki site, to save the Garmin settings, hit enter, and then turn the power off.  You can now resume normal operations with the GNS-430, and new Dynon settings

Thanks  Tim