GPS Hookup

[vonbaron1]

Can anyone tell me how the physical hookup is done for a D10A with AP74 and a Garmin 560?  Looking for the hookup from the gps to the DSAB's I would imagine.  Did not find any information on old post that I can see.

 

[jakej]

vonbaron

page 2-2 (vers 5.4) shows it as Gps (serial) IN on pin 22 - do not connect this directly to Dsab.

HTH

Jake j

 

[vonbaron1]

Jake,
Page 2-2 of what, the Dynon manual? No 2-2 in the info I have. My T-51 has been a long project, so some stuff may have went astray. But still hunting here. At least I know what NOT to do.

 

[dynonsupport]

Yes, that's in the latest manual, which can be downloaded from http://www.dynonavionics.com/docs. Also note that if you have had your equipment in a box for a while, you'll want to update it to the latest version of firmware. See http://www.dynonavionics.com/docs/support_software.html and read everything to get your bearings on updating firmware on your product.

 

[vonbaron1]

Your correct as I found my manual is to old and downloaded a updated version and also the software to bring thing up to speed again. Also found out that the Garmin 560 needs a different mount with what they call "bare wires" so one can hook it up. The parts are starting to fall together finally with your help. See what happen later during the hookup. Its check and recheck for the moment. Thanks for the help.