green trim indication

[ned]

How does one move the green take-off trim indicator to a new position? I do not have the auto pilot panel, if that makes a difference.

 

[dynonsupport]

It's in hardware calibration, in setup

 

[ned]

I have looked there but these are the only options I have listed. I set this up about a year ago, but I have slept since then.

 

[dynonsupport]

It's in elev calibration in your second screen shot.

 

[ned]

Now why did I not think of that? Duh!
Thank you Dynon.

 

[swatson999]

Now why did I not think of that? Duh!
Thank you Dynon.

It's in the Installation Manual, p. 7-59

Trim and flaps position potentiometers must be calibrated Your SkyView display
utilizes onscreen wizards that help you do this. Go to the EMS Calibration Menu to
access these wizards (SETUP MENU > HARDWARE CALIBRATION > EMSCALIBRATION).
The take-off position will be shown as a green line on the trim widget. If you do
not want this marking on your trim widget, press NONE during the take-off
position portion of the trim calibration.