Install complete Skyview system including engine monitor

G

GummiBear

New Member
Joined
Jan 27, 2022
Messages
2
Does anybody have a complete list of all the systems required to install the HDX , GPS, radio, plus all the sensors for a 6 cylinder fuel-injected Lycoming IO-540 engine? Have the Garmin radio with intercom which should interface with the new system.
My aircraft, a Harmon Rocket II, everything is 30 years old but the radio. Thinking the 10 inch display should just fit.

Thanks for any help that comes my way.

Tom "GummiBear" Gummo
Retired F-4G Wild Weasel Instructor Pilot
Builder And Owner of Homebuilt:
N480FS, RV-12iS
N561FS, Harmon Rocket II (Gummo Special)
 
You can get a step-by-step guide to making your own list (and seeing how expensive the UK is compared to the USA) by going to:

www.gps.co.uk
Click on Avionics in the top blue bar
Click on EFIS Systems
Click on Dynon Avionics EFIS
Click on Dynon Avionics Skyview

This will then give you a step 1, step 2 etc and list the bits for the EMS, autopilot, network cables etc etc. Just add them to the shopping basket and you'll get a decent list of everything you need.
 
You must log in or register to reply here.
Back
Top