installing the EDC and OAT on my D10A

[grease371]

OK, I can't stand it any longer. I love my D10A but have never connected the AOA audible output, GPS, EDC and OAT. So I figure I'm getting about 75% of my monies worth.
My questions:
1) Please tell me the price of the OAT for the D10A and how I should order it.
2) I already have the EDC but not the wiring harness. Please recommend what type of wiring harness' I should use for both the EDC and OAT (i.e.-shieded, wire size, etc.)
3) what minimum distance do yor recommend from the EDC to the engine and radio antennas?
Thanks,
Dennis Scearce
Mooresville, NC

 

[dynonsupport]

The price for the OAT probe is $65 plus shipping. You can call us, order on our online store, or call any distributor.

So you have an EDC but it's not connected? There isn't a wiring harness that goes from the EFIS to just the EDC. There's only one connector on the EFIS, so the wiring harness we sell has power, EDC, and a lot of other connections on it. If you already have our wiring harness, it came with EDC wires (about 20' of them). The OAT doesn't have a harness- you need to hook it up to the EDC pins yourself, but it's pretty easy.

Radio antennas aren't a huge deal for an EDC, but 6" would be nice. The engine is a big, shaking mass of all sorts of metal, so 24" would be nice. There are no hard rules with magnetics unfortunately.