GKC Aviation
Active Member
- Joined
- Oct 4, 2020
- Messages
- 112
Has anyone managed to interface an Advanced Flight Systems 44100 hall effect current sensor into a SkyView HDX system?
It's left over from the previous avionics fit out, and is a nice little unit. I could fit a shunt there if it came to it (it's for a second battery and alternator).
The only options that come up in the sensor setup is for the GRT CS-01 and CS-02, neither of which work.
Advanced Flight Systems provided a wiring diagram interfacing it to the EMS on one of the enhanced general input pins, I'm just having trouble configuring it to work.
It's left over from the previous avionics fit out, and is a nice little unit. I could fit a shunt there if it came to it (it's for a second battery and alternator).
The only options that come up in the sensor setup is for the GRT CS-01 and CS-02, neither of which work.
Advanced Flight Systems provided a wiring diagram interfacing it to the EMS on one of the enhanced general input pins, I'm just having trouble configuring it to work.
