Internal Error Service unit

n320JS

S.T.O.L.
Joined
Sep 23, 2013
Messages
7
Just powered up my D-180 for the 1st time and it gave this error on the screen over the EFIS background. Also seemed to have a sound like an auto-reset breaker clicking on and off. Also I put in my Internal battery which is new, but been sitting a while., the Volt meter said 0 on that screen, but not sure if it is accurate since the internal service error message is on. Boy I was hoping this install would go well so I could wrap up my engine install...
 

Dynon

Dynon Staff
Staff member
Joined
Jan 14, 2013
Messages
14,232
Location
Woodinville, WA
So the clicking is normal, but the error is not. Get in touch with our technical support staff at 425-402-0433 or support at dynonavionics dot com for further help on this.
 

n320JS

S.T.O.L.
Joined
Sep 23, 2013
Messages
7
I put the battery back in and charged the unit overnight after talking to your support and the internal error disappeared. I am hoping all is good now?
 

Dynon

Dynon Staff
Staff member
Joined
Jan 14, 2013
Messages
14,232
Location
Woodinville, WA
The error fundamentally means that the product has self-detected a data inconsistency. It could be that bits in ram got scrambled once ever (as can rarely happen with any computing device). If you never see the error again, you're probably OK. If it comes back now and then, we probably ought to see it here.
 
Top