Kavlico Fuel Pressure Sensor - Rotax 912 iS

[sunfish]

I've wired up the EMS 221 for a Rotax 912iS and am slowly working my way through configuration.

The fuel pressure sensor has a red "X" through it although I have checked it has 5 volts and a ground. Why won't it show "O.0 PSI"? Is this normal behavior? The sensor debug page shows a voltage, a cal value and the next column it says "nan" what does that mean?

 

[jakej]

Nan usually means it’s not connected, in some way whether it’s physically not or via a setting.

 

[sunfish]

Fixed it - downloaded the latest EMS definitions file and it all seems to work now.