keep alive?

[Richard_Benson]

Does the keep alive wire need to be connected to retain engine limit functions? (green arcs)

 

[dynonsupport]

Richard:

No, that's not one of the functions of the Keep Alive circuit. All engine parameters (settings) are retained in non-volatile memory. We recommend the disconnection of the Keep Alive circuit - see the service bulletin.

Does the keep alive wire need to be connected to retain engine limit functions? (green arcs)

 

[dynonsupport]

The only data the keep alive keeps is the clock. All settings are retained even if all power is lost.

 

[airguy]

The clock resets on GPS acquisition based on signal timestamp, doesn't it? So no need for the keep-alive on the clock...