LEVEL Button

[skyviewnorge]

I have innstalled AP on SKyiew. The configuration works well.

On the stick I have a separate button for the LEVEL Button.
But when I press LEVEL Button on the stick, nothing happens with the servos.
I have connected negative and pin 37 pin Pin 28.

Questions:
1 Can I see in the skyview and make sure that the 37 pin Pin 28 is properly connected?
2. Do the LEVEL Button on Patch button need to be configured / activated in any way?

 

[Dynon]

1) See SETUP MENU > LOCAL DISPLAY SETUP > DISPLAY HARDWARE INFORMATION
2) No, but make sure you've read all of the considerations about the contact input in the AP installation section of the SkyView Installation manual (I won't repeat them here, but there are a few things about not connecting the button to multiple screens, etc.