Lost connection to efis 100 to Garm 496

[pilot1950]

I upgraded the firmware on my garmin 496. The 496 is working ok but now have lost conection to my Efis D100. No windsock etc. I also lost gps conection to my CT flyer autopilot. What happened?

 

[jakej]

go into the gps setup - the NMEA output is most likely off, happens with several brands of Gps when updating

HTH

Jake J

 

[dynonsupport]

Also likely is that it changed your advanced NMEA out setup from NORMAL to FAST. Unlike our products, the 496 forgets a lot of settings when it's updated.

 

[pilot1950]

Problem solved. The NMEA output was off. thanks guys.