No trim indicator on 120 screen

[rv8apilot]

I have the EMS 120. I connected the wires from the Ray Allen elevator and aileron trim, servos and relays to the 120 as per the installation manual . No trim indicator shows on the screen. The calibration seems to work, i.e., the number scrolls up and down with the trim, but no little bar on the screen. Am I overlooking something in the setup, or did I perhaps make an incorrect connection?

Thanks for your help

 

[dynonsupport]

You need to turn on the display of trim and flaps. Go to SETUP->GLOBAL->INFO ITEM CONFIG. One of those needs to be set to "TRIM POS"